That being said, I have a Kingston A400 240GB myself with the infamous SATAFIRM S11 problem, happened last week after 1,5 years of usage. I wonder if, after using the repairs11.exe, the data recoverable using recovery software.Īlso, anyone have tried replacing the controller chip to fix controller firmware problem?As fzabkar quotes, the procedure is data destructive but I am not exactly sure how the data is actually destroyed (if using secure erase or through other means) that being said I have read many boards and the software that seems to have the best chance of recovering the data seems to be PC-3000 SSD Phison Utility. In case of successful checks, confirmation of the operation is requested, you need to press "Y" and "Enter", to refuse any other button.Īfter successful operation, you need to turn off and turn on the computer (or power on ssd). If you start without parameters, a list of available disks and a disk number request will be displayed. You can start without parameters and enter the disk number at the request of the program. To start the program, you need to specify the disk number in the system as a parameter, it can be viewed in the "Computer Management" -> "Disk Management" console. It is also possible to work through some usb-sata bridges, for example asmedia asm105x / 115x, jmicron jm 20329/539/578, initio inic1608 and some others. Surely it will not work with the drivers for the controllers in the SCSI and RAID controllers section. Performance with other drivers has not been tested. The disk must be connected to the SATA controller (connection via firewire is not supported), it supports the work with standard AHCI drivers from Microsoft, Intel RST, it will probably work with IDE drivers. Requires starting with administrator rights (under Vista / higher systems, a request for rights is made). You can use Windows PE based on the same versions. System requirements - Windows XP / SP2 and higher, use of x86 and 圆4 versions is possible. The identification data (model name, serial number) of the disc is kept original. raw value of the smart attribute 0xA7 (167), if any, equal to 3 (does not apply to disks from kingpec).ĭata, in the event of a successful recovery, is destroyed. a firmware version in which instead of a dot the symbol 'W', for example, "SBFM01W1", or "INICWP00" model name "SATAFIRM S11" or "INIC6081SSDWP" It is also possible that disks with a controller relabeled in INIC6081 (found under the Kingspec brand) are supported.ĭistinctive features of this state of the disk is: The program is designed to restore the health of disks on the Phison 3111 (S11) controller, for example, Smartbuy Revival2, Kingston A400, which, due to some problems, went into protective mode.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |